Eliwell Sb655 C Manual Instant
If you are searching for the Eliwell SB655 C manual , you likely have a refrigeration or HVAC control panel in front of you that needs programming, troubleshooting, or an electrical connection check. The Eliwell SB655 C is a classic, highly reliable digital temperature controller widely used in commercial refrigeration, cold rooms, industrial freezers, and HVAC systems. However, without the manual, navigating its parameters and terminal blocks can be daunting.
| Terminal | Label | Function | Typical Connection | | :--- | :--- | :--- | :--- | | 1 | 12V | +12 Vdc output for probe (power supply) | Connect to probe + | | 2 | GND | Ground reference for probe | Connect to probe - | | 3 | PTC/NTC | Analog input for temperature probe (Probe 1) | Signal wire (typically white or yellow) | | 4 | N | Neutral (Power supply input) | 230V Neutral Line | | 5 | L | Live (Power supply input) | 230V Live Line | | 6 | NO | Normally Open output relay contact | Compressor contactor coil (L1) | | 7 | COM | Common output relay contact | Compressor contactor common | | 8 | NC | Normally Closed (rarely used) | Alarm circuit or unused |
A: That is not an error. The display is showing that the compressor is in a minimum off-time delay (parameter dLy). It is protecting the compressor from short cycling. The countdown value will appear (e.g., “3” for 3 minutes remaining). eliwell sb655 c manual
This article serves as a complete digital handbook. We will cover everything from the technical specifications and terminal functions to step-by-step programming, parameter lists, alarm codes, and common wiring diagrams. The Eliwell SB655 C is a microprocessor-based digital temperature controller with an onboard relay output. It is part of Eliwell’s “Easy” series, known for its simplicity and robustness. The device is typically panel-mounted and features a bright 3-digit LED display, four buttons for navigation, and a user-friendly interface.
A: ELIWELL NTC 10kΩ at 25°C (probe type: NTC103AT) is standard. PTC probes (PtC) are also supported if you change parameter S1P to “PtC.” Do not use PT100 (RTD) probes; they are incompatible. 10. Conclusion The Eliwell SB655 C is a workhorse of the refrigeration industry. Whether you are building a new cold room or repairing a frozen display case, understanding its manual is key to a long, trouble-free service life. If you are searching for the Eliwell SB655
| Code | Parameter Name | Description | Typical Range | Recommended Setting | | :--- | :--- | :--- | :--- | :--- | | | Setpoint | Desired controlled temperature | LS to US | 2.0°C (cooler) / -18.0°C (freezer) | | Hy | Hysteresis | Differential (cut-in – cut-out). Compressor starts at SP+Hy, stops at SP. | 0.1 to 25.0°C | 2.0°C (reduces cycling) | | LS | Minimum Setpoint | Lower limit to lock SP | -50 to US | -30°C (freezer) / 0°C (cooler) | | US | Maximum Setpoint | Upper limit to lock SP | LS to 150°C | 8.0°C (cooler) / 0°C (freezer) | | OdO | On Delay Output | Delay before energizing output after power-up | 0 to 250 min | 2 min (protects compressor) | | dLy | Delay | Minimum off time for compressor | 0 to 60 min | 5 min (crucial for compressor life) | | PA | Password | Access code for parameter menu | 0 to 199 | 3 (default) | | C_F | Temperature Scale | Celsius or Fahrenheit | C / F | C (or F for USA) | | S1P | Probe 1 Type | Type of temperature probe | PtC / ntC | ntC (usually for NTC 10k) or PtC |
Note: Additional parameters for defrost (if using an external SSR/relay) and digital inputs exist but are rare on the base SB655 C model. The Eliwell SB655 C manual lists several alarm codes on the display. Here is how to interpret them: | Terminal | Label | Function | Typical
This guide is for informational purposes. Always consult the original manufacturer’s documentation specific to your unit’s revision before performing electrical work.