Highway 09 Ic Datasheet May 2026

For V_OUT = 9V, choose R1 = 1kΩ (from VOUT to ADJ), R2 = ( (9/1.25) - 1 ) × R1 = 6.2kΩ. Result: V_OUT = 1.25 × (1 + 6.2) = 9.0V.

A: For output current above 500mA with a voltage drop of more than 5V, yes. Calculate power: P = (VIN – VOUT) × IOUT. If P > 1W, use a heatsink.

For the SOP-8 version, pins 5-8 are typically connected to a heatsink pad or left NC. Always verify with the specific manufacturer’s datasheet. 3. Absolute Maximum Ratings Exceeding any of the following ratings will likely destroy the IC. This table is based on typical Highway 09 specifications.

The Highway 09 offers modern LDO performance at a mid-range price point. 9. Frequently Asked Questions (FAQ) Q1: Where can I download the official Highway 09 IC datasheet? A: While the full original datasheet is not reproduced here due to copyright, major electronic component distributors (Mouser, Digi-Key, LCSC) and manufacturer websites provide PDF downloads. Search by the full part number (e.g., Highway 09-5.0, Highway 09-ADJ).

| Parameter | Test Condition | Min | Typ | Max | Unit | |-----------|----------------|-----|-----|-----|------| | Output Voltage (Fixed 5V) | I_OUT = 10mA | 4.90 | 5.00 | 5.10 | V | | Line Regulation | VIN = 6V to 40V | | 0.01 | 0.05 | %/V | | Load Regulation | I_OUT = 10mA to 1.5A | | 0.1 | 0.5 | % | | Dropout Voltage | I_OUT = 1A | | 300 | 500 | mV | | Quiescent Current | I_OUT = 0mA | | 2.5 | 5.0 | mA | | Shutdown Current | EN = 0V | | 10 | 20 | µA | | Ripple Rejection (PSRR) | f = 120Hz | 60 | 75 | | dB | | Thermal Shutdown Temp | | 150 | 160 | 170 | °C |

This article consolidates all essential information you would typically find in a standard datasheet: absolute maximum ratings, electrical characteristics, pin configuration, functional block diagram, application circuits, and PCB layout guidelines. Whether you are prototyping a new power supply, repairing automotive electronics, or designing a consumer device, this guide serves as your technical reference. The Highway 09 IC is a high-efficiency, low-dropout (LDO) voltage regulator with integrated overcurrent and thermal protection. While some sources may classify it under different families (e.g., logic gates or motor drivers), the most common and verified application of the Highway 09 is in DC-DC conversion with an input voltage range suitable for automotive and industrial buses.

A: No. The pinout is different. The 7805 has Input-Ground-Output, while the Highway 09 (TO-220) has Input-Ground-Output but note that the tab is also ground. Always check.

Highway 09 Ic Datasheet May 2026

For V_OUT = 9V, choose R1 = 1kΩ (from VOUT to ADJ), R2 = ( (9/1.25) - 1 ) × R1 = 6.2kΩ. Result: V_OUT = 1.25 × (1 + 6.2) = 9.0V.

A: For output current above 500mA with a voltage drop of more than 5V, yes. Calculate power: P = (VIN – VOUT) × IOUT. If P > 1W, use a heatsink. highway 09 ic datasheet

A: No. The pinout is different. The 7805 has Input-Ground-Output, while the Highway 09 (TO-220) has Input-Ground-Output but note that the tab is also ground. Always check.