Jdy40 Arduino Example Best 〈Extended〉

The example above is production-ready. Just change pin definitions, power with clean 3.3V, and you will have a wireless link in under 60 seconds. Have you pushed the JDY-40 to 200 meters? Found a reliable antenna mod? Share your "best" experience in the comments below.

Serial.println("JDY-40 Master/Slave Ready"); jdy40 arduino example best

| Command | Function | Best Setting | | :--- | :--- | :--- | | AT+RFADDR | RF Channel (0-255) | AT+RFADDR=115 (Pick a quiet channel) | | AT+RFNETID | Network ID (0-65535) | AT+RFNETID=5678 (Avoid default 0) | | AT+BAUD | UART baud rate | AT+BAUD=9600 (Most stable) | | AT+RFMD | RF Data rate | AT+RFMD=250 (250kbps = longest range) | | AT+TRPMAX | Transmit power | AT+TRPMAX=1 (Max power) | | AT+SLEEP | Power management | AT+SLEEP=0 (Disable sleep for continuous use) | The example above is production-ready

// ----- RECEIVE BEST PRACTICE ----- while (jdy40.available()) char c = jdy40.read(); if (c == '\n') Serial.print("Received: "); Serial.println(receivedData); Found a reliable antenna mod

String receivedData = "";

Out of the box, the JDY-40 works. But to eliminate interference and maximize range, you must configure it via AT commands.