| Software | Compatibility with MKS Controllers | Key Advantage | |----------|-------------------------------------|----------------| | | Yes (via MKS DLC33, DLC32 with LightBurn firmware) | Professional engraving UI, camera alignment, material library | | LaserGRBL | Limited (only if MKS board runs GRBL-LPC) | Free, active community | | MKS H7 Tool (newer) | Only for MKS H7-based boards | Updated UI, better logging | | Fluidd / Mainsail | Via Klipper firmware on MKS boards | Web-based, remote control |
| Component | Requirement | |-----------|--------------| | Operating System | Windows 7 SP1, 8, 10, or 11 (32-bit or 64-bit) | | CPU | 1 GHz or faster | | RAM | 1 GB (2 GB recommended) | | Disk Space | 200 MB for installation + workspace | | Connectivity | USB 2.0 or higher (for direct controller link) | | Extras | .NET Framework 4.6+ (installer may prompt) | mks laser tool setup v1 1.2 exe download
If you are setting up a new laser machine or troubleshooting an old one, keep this guide handy. Bookmark the official GitHub page, join the Makerbase community on Discord or Reddit, and never underestimate the importance of a good backup configuration. With v1.1.2 properly installed, you’ll gain the control and insight needed to produce high-quality laser work with minimal frustration. Last updated: [Current Date] – Information about MKS Laser Tool v1.1.2 is based on community feedback and manufacturer documentation. Always refer to your controller’s manual before applying settings. | Software | Compatibility with MKS Controllers |
Introduction In the world of CO2 laser engraving and cutting, software reliability is just as important as hardware precision. For users of Chinese-manufactured laser controllers—particularly those based on MKS (Makerbase) and compatible DSP systems—the MKS Laser Tool has become an essential utility. The version v1.1.2 represents a stable release that many users seek for its balanced feature set and operational stability. Last updated: [Current Date] – Information about MKS
| Current | USB: normal 30 mA; Suspend mode 300 uA RS-232: Quiescent 1-2 mA typical (continuous), transmitting 8-9 typical (5ms duration), peak at power on 12 mA |
| USB & RS-232 Size |
Length: 3.94” (100.0mm) Width: 1.28” (32.5mm) Height: 1.23” (31.3mm) |
| USB & RS-232 Weight |
Weight: 4.5 oz. (127.57 g) |
| TTL 100 mm Size |
Length: 3.94" (100 mm) Height: 1.23" (31.3mm) Width: 1.28" (32.5mm) |
| TTL 101 mm Size |
Length: 4.0" (101.6 mm) Height: 1.08" (27.4 mm) Width: 1.62" (41.1 mm) |
| Temperature | |
| Operating | -30 °C to 70 °C (-22 °F to 158 °F) |
| Storage | -40 °C to 70 °C (-40 °F to 158 °F) |
| Humdity | |
| Operating | 10% to 90% noncondensing |
| Storage | 10% to 90% noncondensing |
| Altitude | |
| Operating | 0-10,000 ft. (0-3048 m.) |
| Storage | 0-50,000 ft. (0-15240 m.) |
