A second mechanic found a cracked vacuum hose near the brake servo. The tiny leak (3mm split) was causing the turbo actuator to see only 0.3 bar instead of 0.8 bar. The ECU, seeing sluggish vane movement, logged overboost when the system finally caught up.
Let’s be clear from the start: Instead, it is a manufacturer-specific diagnostics code used by Renault’s proprietary systems (like the CLIP interface). In the world of Renault diagnostics, “MOT” stands for Moteur (French for “Engine”), and the number indicates a specific fault condition.
A: Almost never. ECU failure for boost control is exceptionally rare. If a mechanic skips vacuum diagnostics and blames the ECU, find a new mechanic. 9. Final Verdict & Cost Summary | Repair Approach | Success Rate | Typical Cost (Parts + Labor) | |----------------|--------------|------------------------------| | Vacuum hose replacement | 60% | $30 – $100 | | Vane cleaning (on-car) | 80% | $150 – $300 | | Solenoid + sensor replacement | 15% (when done alone) | $100 – $200 | | Turbo rebuild/replace | 95% but overkill | $800 – $1,500+ | mot 1654 renault
Replaced the turbocharger ($1,100) – Code returned after 80 miles.
This article breaks down what code 1654 means, which Renault engines it affects, the common symptoms, diagnostic steps, and permanent fixes. After cross-referencing Renault’s technical bulletins and owner forums, MOT 1654 typically refers to a Turbocharger Pressure Regulation Fault — more precisely, a deviation between the requested boost pressure and the actual measured boost pressure (often a positive deviation or overboost). A second mechanic found a cracked vacuum hose
In plain English: The engine’s ECU (Engine Control Unit) commands a certain amount of boost from the turbocharger, but the sensors report that the system is producing too much pressure for too long.
A: Yes. DF054 is the same code in Renault’s older 4-digit systems. MOT 1654 is the CLIP tool’s display format. Let’s be clear from the start: Instead, it
Date: October 2023 Reading time: 6 minutes