Palfinger-crane-manual-error-codes May 2026

| Category | Typical Prefix | Meaning | | :--- | :--- | :--- | | | E-01 to E-10 | Low battery, alternator issues, bad ground. | | Sensor (Length/Angle) | E-20 to E-39 | Potentiometer out of range, broken wire in boom tip. | | Pressure/Load | E-40 to E-59 | Overload warning, pressure sensor failure, LMI calibration off. | | CAN Bus / Communication | E-70 to E-99 | Display not talking to central module, wiring harness damage. |

Palfinger is a global leader in hydraulic lifting, loading, and handling systems. Their cranes are renowned for their precision, durability, and advanced electronic control systems. However, even the most robust machinery will occasionally display an error code. When a flashing number or letter combination appears on your Palfinger crane’s control panel (often an RCL – Rated Capacity Limiter or LCS – Load Control System), it can bring your operation to a halt. Palfinger-crane-manual-error-codes

Turn the battery disconnect switch off for 60 seconds. Reboot the crane electronics. Some codes are "soft" errors from voltage spikes. | Category | Typical Prefix | Meaning |

Stop RA related Fraud and Corruption
by calling our anonymous Fraud Hotline 0800 309 231 (TN Mobile and landlines) or contact us via email,

CTA Image

The national road reserve is the full width of a proclaimed road, including the roadside and the roadway. Proclaimed public roads, such as trunk, main and district roads, generally have a road reserve width of 60 meters, measured 30 meters to either side of the road centre line. The road reserves of these roads fall under the jurisdiction of the Roads Authority.