--- Upgrade Firmware Version 1-255 Ubnt Download May 2026

| Error Message | Solution | | :--- | :--- | | Invalid firmware image | Your device is XW/AC chipset. Version 1.255 is incompatible. | | TFTP timeout (0x0) | Firewall blocking TFTP (UDP port 69). Disable Windows Defender temporarily. | | Upgrade stuck at 50% | Bad Ethernet cable. Use a known good Cat5e cable under 10ft. | | Bootloop after upgrade | Corrupt NVRAM. Perform a 30-30-30 reset: Hold reset button for 30 seconds, unplug for 30 seconds while holding, plug back in while holding for 30 seconds. | Q1: Is version 1.255 the same as AirOS 5? No. AirOS 5 started at version 5.0.1 . Version 1.255 pre-dates AirOS 5 and is strictly a recovery/legacy bridge. Q2: Can I find version 1.255 for the NanoStation Loco M2? Yes. The Loco M2 uses the XM chipset. Download XM.v1.2.55.bin – it works across the entire M-series lineup. Q3: My device shows "Version: 1.255.0" in the corner. Is that a virus? No. This is a cosmetic bug in early AirOS builds. A factory reset usually corrects the version string to 1.2.55 . Q4: Where is the official changelog for 1.255? Ubiquiti does not host changelogs for builds older than 5.x. Community records indicate this version fixed a DHCP client race condition and added compatibility for the older AirView spectrum analyzer. The Bottom Line: Should You Download and Upgrade to Version 1-255? Only if you are reviving a bricked device or maintaining a legacy, isolated network.

https://dl.ubnt.com/firmwares/airmax-m/XM/v1.2.55/XM.v1.2.55.bin If the direct link returns a 404, use the Ubiquiti Community Archive (you must be logged into an Ubiquiti account to access legacy firmware). After downloading XM.v1.2.55.bin (typically ~4.2 MB), verify its integrity using a terminal: --- Upgrade Firmware Version 1-255 Ubnt Download